Alexb_01 Posted May 2, 2009 Share Posted May 2, 2009 Hi, Having made some looks in design mode in WYSIWYG I want to start programming my looks into my lighting desk (Avo Pearl Expert). Is there anyway to get any of the pan/tilt data from looks in design mode? I'd primarily like to get some of the data to make up position palettes to make programming quicker. Having searched all around WYSIWYG I was having no luck so suspect this isn't possible but thought I'd ask first in any case. Thanks in advance, Alex Link to comment Share on other sites More sharing options...
Big Jay Posted May 2, 2009 Share Posted May 2, 2009 What you would need to do is connect your Pearl to WYWIWYG and use the Live Mode, then you can run the rig on WYG from the pearl and store data. Link to comment Share on other sites More sharing options...
Alexb_01 Posted May 2, 2009 Author Share Posted May 2, 2009 Yep I know I can do that but if possible I'd like to avoid having to totally rebuild the look from scratch. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.