peter Posted February 26, 2005 Share Posted February 26, 2005 Mac 250 Wash Details announced today. Link to comment Share on other sites More sharing options...
slim_mcslim Posted February 26, 2005 Share Posted February 26, 2005 cool lots of cash one would imagine, look very superior to a 300 Link to comment Share on other sites More sharing options...
lxdave Posted February 27, 2005 Share Posted February 27, 2005 Looks good. Any ideas on the development of it - is it still in prototype? Link to comment Share on other sites More sharing options...
ag_lx Posted February 28, 2005 Share Posted February 28, 2005 Looks good. Any ideas on the development of it - is it still in prototype?<{POST_SNAPBACK}> Martin are looking to launch to a selected few this summer... ...but I didn't tell you! :( Link to comment Share on other sites More sharing options...
Just Some Bloke Posted February 28, 2005 Share Posted February 28, 2005 I love the fact that they have both 3 and 5 pin DMX connectors. Link to comment Share on other sites More sharing options...
SparkySteve Posted February 28, 2005 Share Posted February 28, 2005 .......as do a number of martin fixtures Link to comment Share on other sites More sharing options...
Mystic Posted February 28, 2005 Share Posted February 28, 2005 But if you can afford martin, you already have a bunch of 3-to-5 or 5-to-3 DMX adapters (not to speak about inverters :) )... However besides of the press effect the fixture seems good afterall... Link to comment Share on other sites More sharing options...
TomLyall Posted February 28, 2005 Share Posted February 28, 2005 Out of interest, which other martin fixtures have XLR5s as well? All of ours at work have been changed to 5 pin anyway, I personally think it makes for much neater rigging. Link to comment Share on other sites More sharing options...
lxdave Posted February 28, 2005 Share Posted February 28, 2005 I personally think it makes for much neater rigging. Why? There the same size, unless you mean rather than adapting etc? Link to comment Share on other sites More sharing options...
TomLyall Posted February 28, 2005 Share Posted February 28, 2005 I personally think it makes for much neater rigging.Why? There the same size, unless you mean rather than adapting etc?<{POST_SNAPBACK}> Yes, even though they're the same size, it saves on adaptors, one less thing to worry about. :) Link to comment Share on other sites More sharing options...
lxdave Posted February 28, 2005 Share Posted February 28, 2005 Fair enough. The company I work for when using Macs had a 3 pin system on the floor, and a 5 pin system in the rig. Because they used an in house DMX wiring system, they used a split from a lower place, and ran that into the macs on the floor. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.