Kazeja Posted November 8, 2013 Share Posted November 8, 2013 Thanks all for helping, all my cables have been checked and no fault found but guess what ? after an hour or so of running the PARs on my Velleman - computer setup the lights became erratic again I removed the terminator and they worked fine and as I have used the same setup with my other led PARs it must be the new ones that are at fault It sounds like the lights are putting a larger than usual load on the DMX line. If you have access or your budget allows for a DMX buffer box, try that on the problematic units. K Link to comment Share on other sites More sharing options...
norty303 Posted November 8, 2013 Share Posted November 8, 2013 Try patching a dummy fixture on ch512 to force the full number of channels to be transmitted. Link to comment Share on other sites More sharing options...
timsabre Posted November 8, 2013 Share Posted November 8, 2013 Try patching a dummy fixture on ch512 to force the full number of channels to be transmitted. He said earlier that he's using one of those Stairville LED controllers, which are just fixed output. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.